micron

常見例句

• The particle radius unit, the micron, is especially common and useful.
  粒子半徑的單位是微米, 微米這個單位尤其普通和有用.
• They all basically reach an ultimate vacuum pressure of. 1 micron.
  它們基本上能達到. 1微米的極限真空壓強.
• At last future developments of micron op let in microfluidic are prospected.
  論文展望了微液滴的發展前景.
• Stage 2 : Full thickness macular hole, can opener tear or pseudooperculum, 400 micron in diameter.
  全層黃斑裂孔, 可為開罐式撕開或 假性 包蓋,直徑小于400微米(裂孔).
• Filter element micron ratings are available from. 1 to 300 micron depending on media type.
  過濾元件微米收視率可從0.1至300微米取決于介質類型.
• They all basically reach an ultimate vacuum pressure of. 1 micron.
  它們基本上能達到. 1微米的極限真空壓強.
• At last future developments of micron op let in microfluidic are prospected.
  論文展望了微液滴的發展前景.
• As athe micron dimension of sample pool, the liquid in it can be as micro fluid.
  樣品池的尺寸通常是在微米級, 其中的流體可以視為微流體.
• It is able to trap particles above 0.3 micron in size.
  它能阻隔0.3毫米以上的微粒.
• FDA tested & approval ( USA ) with 5 micron filtration provides more effective filtration . Reduce organic toxin and heavy metals.
  采用符合美國 FDA 標準,孔徑5微米的過濾膜處理,可有效去除水中較粗之固體沉淀物,以確保水中混濁度,保持標準.
• Surface finish generated was 11.95 micron Ry.
  表面處理產生的是11.95微米線索.
• Micron scale spheres may be preserved in quenched volcanic matrix.
  有時微米級球體可以在淬冷火山巖基質中得以保存.
• Thermal strain can be a troublesome source of micron level errors in precision manufacturing.
  在精密制造中,熱應力可能造成微米級誤差.
• By virtue of process stability, LinkTronix founded 800 Z easily 10 micron Kodak vision screening party better.
  憑借更高的處理穩定性,超勝800Z可輕松進行10微米柯達視方佳加網.
• With this Optical Equipment , we are able to distinguish 0.025 micron microwave.
  用這臺光學儀器, 我們可以分辨出0.025微米的微波.
• Micron: Alternative term for Micrometre . A unit to denote the caliper of paper and board.
  微米: 英文是百萬分之一米的另一寫法. 表示紙或紙板厚度的單位.
• The machining results show that the developed machine tool can reach the accuracy of micron order.
  基于此原理開發的活塞異形銷孔設備達到微米級加工精度.
• Special ultra fine sub micron grade for high speed milling especially for mould making.
  特別適合高速銑削的晶粒度為超細的牌號,特別適合模具制造.
• The thickness of lubricating film in micron level was feedback controlled by adopting PID control arithmetic.
  采用PID控制算法對微米級的潤滑膜厚度進行反饋控制.
• Stage 2 : Full thickness macular hole, can opener tear or pseudooperculum, 400 micron in diameter.
  全層黃斑裂孔, 可為開罐式撕開或 假性 包蓋,直徑小于400微米(裂孔).
• Filter element micron ratings are available from. 1 to 300 micron depending on media type.
  過濾元件微米收視率可從0.1至300微米取決于介質類型.
• They all basically reach an ultimate vacuum pressure of. 1 micron.
  它們基本上能達到. 1微米的極限真空壓強.
• As athe micron dimension of sample pool, the liquid in it can be as micro fluid.
  樣品池的尺寸通常是在微米級, 其中的流體可以視為微流體.
• Basically be 19 micron come among them between 23 micron optimal model and good model abb.
  其中主要是19微米至23微米間的最佳型和良好型羊毛.
• FDA tested & approval ( USA ) with 5 micron filtration provides more effective filtration . Reduce organic toxin and heavy metals.
  采用符合美國 FDA 標準,孔徑5微米的過濾膜處理,可有效去除水中較粗之固體沉淀物,以確保水中混濁度,保持標準.
• For comparison a particle of smoke is about of a micron in size.
  作為比較,煙中的微粒大約是在十分之一微米大小.
• Surface finish generated was 11.95 micron Ry.
  表面處理產生的是11.95微米線索.
• Micron scale spheres may be preserved in quenched volcanic matrix.
  有時微米級球體可以在淬冷火山巖基質中得以保存.
• Thermal strain can be a troublesome source of micron level errors in precision manufacturing.
  在精密制造中,熱應力可能造成微米級誤差.
• By virtue of process stability, LinkTronix founded 800 Z easily 10 micron Kodak vision screening party better.
  憑借更高的處理穩定性,超勝800Z可輕松進行10微米柯達視方佳加網.
• With this Optical Equipment , we are able to distinguish 0.025 micron microwave.
  用這臺光學儀器, 我們可以分辨出0.025微米的微波.
• Standard sub micron grade for solid rotary tool applications.
  是適用于可轉位工具的晶粒度為亞微米級的標準牌號.
• Micron: Alternative term for Micrometre . A unit to denote the caliper of paper and board.
  微米: 英文是百萬分之一米的另一寫法. 表示紙或紙板厚度的單位.
• The machining results show that the developed machine tool can reach the accuracy of micron order.
  基于此原理開發的活塞異形銷孔設備達到微米級加工精度.
• Strip roughness must not exceed 40 microinch ( 1.0 micron ) order to achieve these minimum coat weights.
  板面粗糙度不能超過40微寸 ( 1.0微米 ),以達到最低鍍層重量.
• The thickness of lubricating film in micron level was feedback controlled by adopting PID control arithmetic.
  采用PID控制算法對微米級的潤滑膜厚度進行反饋控制.
返回 micron