permittivity

基本解釋

There is the permittivity vacuum. It is all up there.
這兒還有真空中的介電常數，看，全在這里。
麻省理工公開課 - 固態化學導論課程節選
This is the permittivity of vacuum.
真空中的介電常數是。
麻省理工公開課 - 固態化學導論課程節選
In addition to that, we have that epsilon nought value, remember that's the permittivity constant in a vacuum, and basically that is what we use as a conversion factor to get from units. We don't want namely coulombs to units, we want that will allow us to cancel out in this equation.
這是電子的電荷，此外，我們有epsilon零，記住這是真空的介電常數，這是我們用來轉換單位的轉換常數,我們不想用庫倫單位，我們希望這個可以在方程中約去它。
麻省理工公開課 - 化學原理課程節選

a measure of the response of a substance to an electric field, expressed as the ratio of its electric displacement to the applied field strength measured in farads per metre ( symbol: )&rarrsee also relative permittivity ,electric constant

介電常數
A perturbation test method of rectangular cavity is discussed for determination of complex permittivity of dielectric materials at microwave frequencies.
本文討論了測試電介質微波復介電常數的矩形腔微擾法。
物理學
介電常數
When the permittivity ratio of metal and dielectric medium is more closer to -1, the spatial frequency range for propagational fields is wider.
并且電介質與金屬的介電常數之比越接近于-1,周期厚度越小,傳播場空間頻率范圍越大。
機械工程
介電性能
The permittivity of the film has a maximum with the increasing of the heat processing temperature.
發現熱處理溫度對PST薄膜的介電性能有兩種相對的影響作用,薄膜的介電電容值隨著燒結溫度的增加出現一個極大值。
電容率
介電系數
介電常數

介電特性
MethodA permittivity sensor developed in a previous study was used in laboratory to measure the frequency-response data(gain and phase) of 14 biodiesel/diesel blends(0,5%,10%,15%,20%,25%,30%,40%,50%,60%,70%,80%,90%,100%). Correlation between mixratio and frequency-response was analyzed.
方法采用自行設計的一種介電特性傳感器,在實驗室測量14種混合比(0,5%,10%,15%,20%,25%,30%,40%,50%,60%,70%,80%,90%和100%)的生物柴油與柴油混合燃料的頻率響應特性(振幅增益和相位差),分析頻率響應特性與混合比的相關性,并用PLS和Stepwise回歸法進行擬合,建立混合比的檢測模型。
動力與電氣工程
誘電率
絕對電容率
介電系數
透電率